Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | ABS 20% | ABS 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| No printable model files are available for an estimate yet. | ||||||
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
06 Chevy Impala Console Latch
Shared by
3DPrintedCarPartDescription
BE WARNED! 9/64 drill bit REQUIRED. I had lots of trouble printing this in the past. console latch for 06 impala (may fit up to 13 impala) with the folding middle seat/console. I do not remember what broke on the original, but you might have to break something inside the female console part for this to work. I have the fusion 360 files upon request... tips appreciated. For materials I didn't have luck with pure nylon (no fiber) nor PETG. PLA will melt and lock you out of the console after 1 day in a Texas winter...don't try it. I have only had successful prints with 3 different ABS plastics. Monoprice ABS, reclaimed ABS from an "empty" Cube 3D cartridge, and finally Black Monoprice ABS+.
Compatible Cars
Originally published on thingiverse.com by Anthony Skrobarczyk (AWS3D) · License: CC BY-NC-SA
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
