Files (3)

CellHolderBottomV4.stl

STL

385.5 KB

CellHolderTopV5.stl

STL

114.8 KB

Rändelmutter.STL

STL

95.0 KB

Print guidance estimate

Estimated from part metadata

Print cost & setup estimate

Planning numbers for filament, cost, time, and setup. Treat them as estimates until you confirm the file in your slicer.

3 model files

Typical selected file

21g

Based on 25% main infill for the largest likely-needed model file

Material cost

$0.50

Filament only at roughly $24/kg PETG / ASA

Print time

36m–59m

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
CellHolderBottomV4.stl	Mount / bracket	385.5 KB STL	19g $0.46	21g $0.50	46g $1.10	Ensure a brim or raft is used for stability if necessary
CellHolderTopV5.stl	Mount / bracket	114.8 KB STL	13g $0.31	14g $0.33	30g $0.73	Ensure a brim or raft is used for stability if necessary
Rändelmutter.STL	Printable file	95.0 KB STL	12g $0.29	13g $0.31	29g $0.69	Ensure a brim or raft is used for stability if necessary

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Phone Mounts

1/2U Cell phone holder

0 downloads73 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Redesigned VW Tiguan Mobile Phone Mount by g3org July 01, 2017 tag ID:2413379 to be able to fit in a Honda Accord 1/2 U Automotive cut-out. The "Remix Source Files" search didn't work so it is up to the designer to find the source files.