165mm front speaker adapter for Mercedes C-class W202 - image

Files (1)

adapter-r.stl

STL

79.2 KB

Print guidance estimate

Estimated from part metadata

Print cost & setup estimate

Planning numbers for filament, cost, time, and setup. Treat them as estimates until you confirm the file in your slicer.

1 model file

Recommended kit

50g

Based on 30% main infill across listed model files

Material cost

$1.20

Filament only at roughly $24/kg PETG / ASA

Print time

2.0h saved / 1.4h–2.4h estimate

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 30%	100% solid	Recommendation
adapter-r.stl	Primary model	79.2 KB STL	43g $1.02	50g $1.20	102g $2.44	Verify the final orientation and support needs in your slicer

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Accessories

165mm front speaker adapter for Mercedes C-class W202

1 downloads253 views0 likes

Shared by

Michael Chen

Verified

Description

Front speaker adapters for Mercedes W202 C-class. They should fit all shallow mounted 160-170mm speakers. I use Pioneer drivers that are 50mm deep. Prints with no supports I used PLA 0,3mm layer height, 0.8mm wall and 30% infill just to make things sturdy enough. You will need to drill a small hole for the wires I recommend gluing it after so it doesn't leak. STL included is for the right (passenger) side. You'll need to mirror it to print dirver's side adapter.