Files (1)
Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| 1965_Ford_AM_radio_tuner_connector.stl | Primary model | 575.2 KB STL | Slice file | Slice file | Slice file | Print with rafts for stability |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
1965 Ford AM radio tuner connector
Shared by
3DPrintedCarPartDescription
Internal connector for a 1965 Ford AM radio tuner. A friend needed one to repair the factory radio in his Mustang, I recreated the factory one to near exact dimensions. I am working on the FM variant right now and it will be uploaded soon. Goes between the radio gear set and the internal side of the knob. Print with rafts and supports, ball end down. I tried it every which way and this worked the best. If you need a different version or any adjustments made feel free to contact me..
Compatible Cars
Originally published on thingiverse.com by Dalton Kiner (d4lt0) · License: CC BY-SA
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
