Files (1)
Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ABS 20% | PETG / ABS 100% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| 1967_Beetle_Window_Crank_Knob.stl | Primary model | 9.4 MB STL | Slice file | Slice file | Slice file | Use M5 nuts and bolts for assembly |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
1967 Volkswagen VW Beetle Bug Window Crank Knob
Shared by
3DPrintedCarPartDescription
This is a one-year only-1967 VW Beetle window crank knob. I designed it to be used with M5 nuts and bolts. The indentation in the knob allows for accepting an M5 nut with some persuasion (you would need to gently hammer it in). The bolt goes through the crank handle and screws into the captive nut. Print it with 100% infill - This part will be under stress. PETG or ABS will withstand the temperatures inside the car.
Compatible Cars
Originally published on thingiverse.com by Charming Curmudgeon (CharmingCurmudgeon) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
