Files (1)

BMW_2002_Shift_Knob.stl

STL

3.4 MB

Print guidance estimate

Uses saved filament metadata

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

50g

Based on 25% main infill across listed model files

Material cost

$1.20

Filament only at roughly $24/kg PETG / ASA

Print time

2.0h saved / 1.4h–2.4h estimate

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
BMW_2002_Shift_Knob.stl	Primary model	3.4 MB STL	46g $1.10	50g $1.20	110g $2.63	Ensure proper threading fit during installation

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Accessories

1973 BMW 2002 Shift Knob

1 downloads231 views0 likes

Shared by

Michael Chen

Verified

Description

Tested in my driveway, your mileage may vary I take no responsibility for anything you do with this object. The edges shown in cura are only due to the resolution of the picture, there are no jagged edge on the model. (500kb upload limit) I couldn't find one online so I made it. This is my first STL and it actually works quite well, threading is a little tight so you shouldnt need any locktite/set screw, etc. I used PLA+ and it's holding up fine but you may want to use PETG or something more temperature resistant if it get's extremely hot in your car. Threading is M15 x 1.5 for anyone who wants to make their own. Please post any makes, I'd love to hear your thoughts, and see your results.

Print Settings

Time: 2h

Filament: 50g

Supports: Not needed

Compatible Cars

BMW (all models)

Published Mar 12, 2026Updated Jul 15, 2026

Originally published on thingiverse.com · License: CC BY

Verified by drivers

Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.

Loading fitment proof…

Comments (0)

Part lists

BMW

3.1K

License: CC BY

View & download STL files