Files (2)
Based on 25% main infill for the largest likely-needed model file
Filament only at roughly $24/kg PETG / ASA
Uses 70 mm/s, 0.2 mm layers; verify supports in slicer
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| CHEVY_K5_BLAZER_Emblem.stl | Printable file | 381.4 KB STL | 19g $0.46 | 21g $0.50 | 46g $1.09 | These emblems are intended for decorative/interior use, but if used externally, ensure proper sealing to prevent water ingress. |
| Chevy_K5_Blazer_Silverado_Emblem.stl | Printable file | 559.1 KB STL | 22g $0.53 | 24g $0.58 | 53g $1.26 | These emblems are intended for decorative/interior use, but if used externally, ensure proper sealing to prevent water ingress. |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
1981-1988 CHevy K5 Blazer Emblems
Description
I could not find STLs for these emblems so I I created these as a place holder for my Blazer until I can afford metal ones. They are crude and not perfectly to spec. I down loaded the Chevy font from the interwebs but it is not exactly like the Chevy font but close. If you can use them just toss me some cred on paypal @DGurley429, Thanks.
Compatible Cars
Originally published on thingiverse.com by David Gurley (dgurley) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
