Based on 25% main infill across listed model files
Filament only at roughly $24/kg PETG / ASA
Uses 70 mm/s, 0.2 mm layers; verify supports in slicer
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| No printable model files are available for an estimate yet. | ||||||
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
1985 Toyota MR2 AW11 Mk1a Battery Holddown
Description
My aw didn't come with the battery hold down and nobody online sells ones that fit the special battery holder thing on this old car, so I modeled it. For screws I used 1x 14" J-bolt and 1x 1/4-3/4 bolt from ace the helpful place (tacoma screw was closed). Depending on how large of a bolt you use for the upper flange, you might need some washers to act as spacers. Hope this helps someone. Seems to do a half-decent job of holding my battery in place.
Compatible Cars
Originally published on thingiverse.com by Too Legit (fbicantholdmedown) · License: All Rights Reserved
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Most specific car + model + year + category matches first, with popular parts mixed in.
