Files (1)

civic_hood_latch.stl

STL

249.8 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
civic_hood_latch.stl	Primary model	249.8 KB STL	Slice file	Slice file	Slice file	Ensure a strong bond between the printed part and the existing cable by using superglue and possibly sanding the surfaces for better adhesion.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Hood

1998 Honda Civic hood latch

0 downloads59 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Replacement part for 1998 Honda Civic hood latch. The pull part on the Civic hood latch can snap off in cold temperatures, and the only replacement available is the entire latch and cable. This design allows you to superglue this replacement latch over the remaining plastic on the cable from your last latch. It's customizable, so if you opt to remove the old plastic, you could decrease the inner cylinder size. I used superglue to attach this latch. I sanded down the old plastic, and filed the inside of the new latch slightly for a perfect fit. The photo is of the latch in place on the car.