Files (2)

License_plate_cover.stl

STL

22.5 KB

Perrinlogo.stl

STL

57.3 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

2 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
License_plate_cover.stl	Cover / cap	22.5 KB STL	Slice file	Slice file	Slice file	Small functional file: print slowly; consider 80–100% infill for durability.
Perrinlogo.stl	Printable file	57.3 KB STL	Slice file	Slice file	Slice file	Ensure proper bed adhesion due to the large print size

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Exterior

2002 - 2005 WRX license plate cover w/ perrin logo

0 downloads34 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

This is a cover for the front license plate mounting point on a 2002 - 2005 WRX. The plate and logo are separate pieces that need to be glued together. I have put over 2000+ miles on this with PLA filament and there has been no discoloration/warping. This cannot be printed with anything less than a 290mm x 290mm print bed.