2003 Corolla Accessory button cap - image

Files (1)

Corolla_panel_cap.stl

STL

21.6 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Corolla_panel_cap.stl	Cover / cap	21.6 KB STL	Slice file	Slice file	Slice file	Small functional file: print slowly; consider 80–100% infill for durability.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Knobs/Buttons

2003 Corolla Accessory button cap

0 downloads40 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

This is a cap to fill the unused accessory buttons to the left of the steering wheel. In higher end Toyota models the buttons activate traction control and so on. The OEM cap and the first iteration of the design broke where the arms met the panel, so I added struts at the base of each arm. I suggest using a stronger filament for this print because how widely car temperatures vary.