2009/2010 Pontiac Vibe Radio Knob - image

Files (1)

20092010_pontiac_vibe_radio_knob.stl

STL

43.7 KB

Print guidance estimate

Estimated from part metadata

Print cost & setup estimate

Planning numbers for filament, cost, time, and setup. Treat them as estimates until you confirm the file in your slicer.

1 model file

Recommended kit

11g

Based on 25% main infill across listed model files

Material cost

$0.26

Filament only at roughly $24/kg PETG / ASA

Print time

18m–30m

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
20092010_pontiac_vibe_radio_knob.stl	Primary model	43.7 KB STL	10g $0.24	11g $0.26	23g $0.56	Ensure a stable printing surface to avoid part warping

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Knobs/Buttons

2009/2010 Pontiac Vibe Radio Knob

0 downloads37 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

If you have a 2009 or 2010 Pontiac Vibe you probably already know that the radio knobs break off very easily. Replacements from the dealer, or online, are not very expensive, but may break again. This replacement isn't very fancy, but it works fine, and can be put on and off without taking the whole radio apart like the original factory knobs. Enjoy? This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/kYStorS50if

Compatible Cars

Pontiac (all models)

Published Jun 28, 2026Updated Jul 15, 2026

Originally published on thingiverse.com by Eric Anderson (Eric0591) · License: CC BY-SA

Verified by drivers

Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.

Loading fitment proof…

Comments (0)

Part lists

Save this part to named public or private collections. Public lists can be shown on this part page.

Related Parts

Finding specific fitment/category matches first.