Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| No printable model files are available for an estimate yet. | ||||||
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
2011 mustang strut cover
Shared by
3DPrintedCarPartDescription
strut cover for a 2011 mustang with 1960s style pony tri bar design. Had to omit a few features in the pony emblem to make this print well but it is not noticeable imo.You might have to use a tiny bit of silicone to get it to stay in place. update: thickened material behind emblem Contact me if you would like to purchase one of my other covers. I’m not releasing the stls at this time so please don’t ask. Thanks!
Compatible Cars
Originally published on thingiverse.com by Matt L (Matt19888) · License: CC BY-NC
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
