Files (1)
Based on 75% main infill across listed model files
Filament only at roughly $24/kg PETG
Uses 70 mm/s, 0.2 mm layers; verify supports in slicer
| STL file | Role | Source size | PETG 20% | PETG 75% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| Button_revised.stl | Primary model | 350.5 KB STL | 19g $0.45 | 36g $0.87 | 44g $1.06 | Print with high infill for added strength |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
2012 Honda Civic SI Ebrake button
Description
This is a replacement ebrake button for my 2012 civic si. The factory original breaks very easily and costs $150 as you can only buy the entire assembly to get it. Print in PETG and not PLA or you will likely melt it in the summer. I chose 100% infill for strength but that probably isnt required. Note: The button comes out fairly easily, as the original had a small tab on the right side of the hole. I haven't experimented with recreating that yet. Edit: Found this one after creating mine. It is a more 1:1 recreation of the original. https://www.thingiverse.com/thing:806806 I think it may have some of the same fragility but the inclusion of the tab/hole will likely keep it secured better.
Compatible Cars
Originally published on thingiverse.com by Justin Seldomridge (Juts) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Most specific car + model + year + category matches first, with popular parts mixed in.
2012 Honda Civic Parking Brake Button
EG Civic accessory button blank
interior light button for Honda civic 6
Honda Civic Automatic shifter push button(Botão Câmbio)
Civic 96 accessory switch
BMW X5 E70 Center Console Blind Plate
BMW
