2013-2018 Ram 1500 Dash Mount for Cell Phones - image

Files (1)

Dodge_Dash_Mine.stl

STL

141.9 KB

Print guidance estimate

Estimated from part metadata

Print cost & setup estimate

Planning numbers for filament, cost, time, and setup. Treat them as estimates until you confirm the file in your slicer.

1 model file

Recommended kit

15g

Based on 25% main infill across listed model files

Material cost

$0.36

Filament only at roughly $24/kg PETG / ASA

Print time

25m–42m

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Dodge_Dash_Mine.stl	Primary model	141.9 KB STL	14g $0.33	15g $0.36	32g $0.78	Ensure a strong adhesion to the print bed to prevent warping

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Phone Mounts

2013-2018 Ram 1500 Dash Mount for Cell Phones

0 downloads315 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

This allows you to attach any Phone mount system to this Dash Mount. I ended up buying this off Amazon: https://www.amazon.com/gp/product/B019GLDXQ6 Works perfectly using the adhesive. For other mounts you can drill into the backing to attach if you so like. Put the included Metal inserts inside your phone case you don't even need to attach it to the phone the magnet will work through phone case just fine with no issues. Installation is a breeze use the existing Star Screws and your off and running. Installation about 1 minute. =).