Files (1)
Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | TPU / ASA 20% | TPU / ASA 90% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| WasherCap_Part_Ford_Focus_2013.stl | Cover / cap | 2.5 MB STL | Slice file | Slice file | Slice file | Use TPU / ASA; check sealing faces and verify in slicer. |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
2013 Ford Focus window washer cap
Shared by
3DPrintedCarPartDescription
This cap is what I designed to replace the one that was lost in our 2013 Ford Focus sedan. The disappearance of the original remains a mystery. I was not successful with other means of restoring the function any in other way. I tried such Things as online purchases of OEM parts or downloads of the designs of others with no luck. I don’t blame anyone but myself for these frustrations. I printed this on my Adimlab Gantry using TPU at 100% infill about a month ago and it survives still in spite the heat and other intense conditions found in the engine compartment. The part was designed via OnShape. When you bring in the file to your slicer (Curs, repetier,, Slic3r, etc you may have to adjust the scale to get it to print it to life size. For example you may have to multiply it by 25.4 factor to get the scale correct. This is to adjust for conversion between metric and imperial units.
Compatible Cars
Originally published on thingiverse.com by Glen Morris (Gmorris) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
