Files (1)
Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ABS 20% | PETG / ABS 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| Focus_ST_Pedal_Spacer.stl | Primary model | 293.1 KB STL | Slice file | Slice file | Slice file | Ensure the bolt holes are sized correctly for M6 bolts |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
2014 Focus ST Gas Pedal Spacer - Customizable
Shared by
3DPrintedCarPartDescription
This is a gas pedal spacer for the 2014 Focus ST (LHD). This should also work for 2012-2015. This enables the user to print a spacer to move the gas pedal further towards the driver to enable Heel-Toe shifting and a more comfortable drive. Please use mm for inputs. The Focus ST bolts are M6 size, so any bolt extenders, nuts, and/or the sizing for the bolt holes should be matched accordingly. This replaces a part that can cost between $50 to $100 and saves a lot of money. I recommend printing in ABS plastic for increased strength, as it is going behind your gas pedal. Simply remove the nuts, slide the spacer in place, and rebolt your pedal box. I think it is an M10 or M11 size nut, I will update with final nut size.
Compatible Cars
Originally published on thingiverse.com by cleyton cavallaro (cleytoncav) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
