2015+ WRX (automatic) iPhone6s & 6s+ & 7s Holder - image

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

0 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	ABS / ASA 20%	ABS / ASA 25%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Phone Mounts

2015+ WRX (automatic) iPhone6s & 6s+ & 7s Holder

0 downloads37 views0 likes

Download at source

Shared by

3DPrintedCarPart

Verified

Description

Update 2016-08-10 I now recommend printing this in ABS. With the car parked in the sun today, outside temp. was 103F (39.4C), the PLA got soft and started to deform. ------- Update 2015-12-28 I've added a new version of this holder to accommodate my iPhone 6s Plus. The channel for the phone is slightly wider and it includes a cutout for the power button, so it isn't accidentally triggered. I've also expanded the tabs on the front so I can reach the navigate button on the Waze app, which is in the far bottom left corner. --------- My kids designed this iPhone6 bracket for my WRX. Used with a right-angle Lightning adaptor, it fits perfectly in the center console. This is modeled for my phone with a Spigen case which makes the phone about 9.5mm thick. The bracket is attached to the car with 3M command strips so it can be easily removed. Of course Velcro would be another option. I printed the prototype in blue, but the final in silver to match the dash.