Files (2)
Based on 25% main infill for the largest likely-needed model file
Filament only at roughly $24/kg PETG / ASA
Uses 70 mm/s, 0.2 mm layers; verify supports in slicer
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| ND_Antenna_Delete_Test5.stl | Printable file | 73.7 KB STL | 11g $0.27 | 12g $0.29 | 27g $0.64 | Ensure a strong adhesion to the print bed to prevent warping |
| ND_Antenna_Delete_Test6_TOP.stl | Printable file | 27.9 KB STL | 9g $0.21 | 10g $0.23 | 21g $0.51 | Ensure a strong adhesion to the print bed to prevent warping |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
2016+ ND1/2 MX5 Antenna Delete
Description
I never use the AM/FM radio in my 2019 Mazda Miata RF Club and hated the way the antenna looked. After looking around at some of the stubby antennas I wanted to make my own even "stubbier" version by deleting it all together. The antenna delete is made up of three parts. The top cone, the bottom base, and a M8 bolt (8mm head, 5mm major diameter, ~10mm in length). The bottom piece has a relief cut into it to allow it to sit flush to the rubber grommet on the antenna base. That way it will be completely sealed and will look relatively factory! Best part is, its completely removable if one decides to sell the car down the road, just twist it off. Let me know if anyone wants any specific changes or requests, I'd be happy to make some tweaks.
Compatible Cars
Originally published on thingiverse.com by Evan English (Rwense) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
