Files (3)

Blank_Badge_eith_ridges.stl

STL

485.4 KB

Blank_badge_no_ridges_no_lettering.stl

STL

39.7 KB

Blank_RAM_ridges_lettering.stl

STL

461.0 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

3 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Blank_Badge_eith_ridges.stl	Printable file	485.4 KB STL	Slice file	Slice file	Slice file	Ensure the model is oriented for minimal supports
Blank_badge_no_ridges_no_lettering.stl	Printable file	39.7 KB STL	Slice file	Slice file	Slice file	Ensure the model is oriented for minimal supports
Blank_RAM_ridges_lettering.stl	Printable file	461.0 KB STL	Slice file	Slice file	Slice file	Ensure the model is oriented for minimal supports

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Emblems/Badges

2019+ RAM tailgate badge

0 downloads32 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

This is the tailgate badge for 2019+ RAM 1500 pickup trucks. I've uploaded a few variations of the badge: Without RAM lettering and without ridge background Without RAM lettering and with ridge background With RAM lettering and ridge background I haven't mounted this to my tailgate but rather held it up to the tailgate to ensure it matches so I'm going to mark this as still a work in progress until I'm 100% sure it fits. Feel free to provide any feedback if you try it out. It will have to be mounted with adhesive of some sort. Keep in mind that if you do not finish the piece you should use a filament that is worthy of being in the sun and elements.