← Back to Browse Parts
24mm socket for pentastar oil filter housing Jeep JK - image

Files (2)

24mmsocket-v1exp.stl
STL
73.3 KB
24mmsocket-v2exp.stl
STL
623.9 KB
Print guidance estimate
Slicer data required
Print cost & setup estimate
Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.
2 model files
Typical selected file
Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost
Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time
Slice required

Slice with the recommended material, infill, orientation, and supports.

STL fileRoleSource sizePETG / ASA 20%PETG / ASA 25%100% solidRecommendation
24mmsocket-v1exp.stlPrintable file73.3 KB STLSlice fileSlice fileSlice fileEnsure proper layer adhesion for a strong socket
24mmsocket-v2exp.stlPrintable file623.9 KB STLSlice fileSlice fileSlice fileEnsure proper layer adhesion for a strong socket

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Tools & Jigs

24mm socket for pentastar oil filter housing Jeep JK

0 downloads35 views0 likes
3DPrintedCarPart logo

Shared by

3DPrintedCarPart
Verified

Description

This is for all you makers that don't have a 24mm socket handy to change the oil in your Pentastar Jeep. A box end wrench or large crescent will work if you don't mind going 1/16 turn at a time against the drag of your old o-ring, but this makes it a little easier. #### V1 1/2" drive tested in PLA and was able to torque filter housing to spec (25 N·m /18 ft. lbs.) as well as break it free initially without breaking the socket. In destructive testing the PLA version failed at 28 ft. lbs. You may want a large crescent to "start" your cover depending on how long it's been since it was last removed. #### V2 Thicker (stronger) version with combo drive for 3/8" or 1/2". This will be stronger at the cost of a longer print time and more material used. Destructive testing will be done shortly and results posted... RE-UPLOADED w/ fixed scaling - Thanks for the feedback:-).

Compatible Cars

Jeep Wrangler
Published Jun 26, 2026Updated Jul 15, 2026

Originally published on thingiverse.com by Drew Beccue (andyjimb) · License: CC BY-SA

Verified by drivers

Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.

Loading fitment proof…
Sign in to share fitment proof, installed photos, and material notes.
Comments (0)
Part lists
Save this part to named public or private collections. Public lists can be shown on this part page.

Related Parts

Finding specific fitment/category matches first.