2DIN Double DIN Radio Frame for Volvo S40 V40 (96-04) - image

Files (1)

2DIN-Frame_Volvo.stl

STL

170.2 KB

Print guidance estimate

Estimated from part metadata

Print cost & setup estimate

Planning numbers for filament, cost, time, and setup. Treat them as estimates until you confirm the file in your slicer.

1 model file

Recommended kit

16g

Based on 25% main infill across listed model files

Material cost

$0.38

Filament only at roughly $24/kg PETG

Print time

27m–45m

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG 20%	PETG 25%	100% solid	Recommendation
2DIN-Frame_Volvo.stl	Primary model	170.2 KB STL	14g $0.35	16g $0.38	34g $0.83	Print with a nozzle temperature of 240°C and a bed temperature of 80°C for optimal results.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Interior

2DIN Double DIN Radio Frame for Volvo S40 V40 (96-04)

0 downloads29 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

If you install a 2DIN radio in a Volvo S40/V40 (96-04) there is a little gap between the standard metalframe and the housing. This adapter frame fills the gap between the metalframe and the housing so the metalframe fits tight and the radio can not move. The frame is suitable for all aftermarket 2DIN radios (Kenwood, JVC, Sony, Pioneer, etc.). I recommend PET-G (black) for printing. With 240°C nozzle temp. and 80°C bed temp. I have the best results.

Compatible Cars

Volvo (all models)

Published Jun 28, 2026Updated Jul 15, 2026

Originally published on thingiverse.com by Mo La (elmo404) · License: CC BY-SA

Verified by drivers

Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.

Loading fitment proof…

Comments (0)

Part lists

Save this part to named public or private collections. Public lists can be shown on this part page.

Related Parts

Finding specific fitment/category matches first.