40oz Water Bottle Cup Holder for Subaru Crosstrek/STI/WRX preview

Files (1)

40oz_Subaru_CupHolder.stl

STL

958.1 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
40oz_Subaru_CupHolder.stl	Mount / bracket	958.1 KB STL	Slice file	Slice file	Slice file	Use a heated chamber if available to reduce warping

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

40oz Water Bottle Cup Holder for Subaru Crosstrek/STI/WRX

0 downloads17 views0 quality score

Print this part

Check the available model and saved setup details before opening your slicer.

Files

1 hosted model file

STL

Material

PETG or ASA

Print time

Slice to calculate

Filament

Slice to calculate

Supports

verify in slicer

Infill

20-30% infill for durability and weight balance

Difficulty

Not rated — inspect geometry

Vehicle heat

Cabin/interior use; avoid high-heat zones

Open the STL, 3MF, or OBJ model in your slicer before printing. Confirm orientation, supports, print time, filament use, and printer compatibility. Test-fit before installing it in a vehicle.

License & use

CC BY

Commercial use allowed

Attribution required

The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.

Shared by

3DPrintedCarPart

Verified

Description

This is a remixed model of the "2019 Subaru Crosstrek_40 oz Water Bottle Holder" made by tomecar. The goal of this remix was to reduce overhang angles to a max of 45º and to smooth out the overall geometry and appearance. Compatibility I have not had an opportunity to test the compatibility on anything other than a 2019 Crosstrek. The other models listed use the same cup holder mat (92177AG170) leading me to believe that the cup holders they are paired with would have very similar if not identical dimensions and clearance. Here is a list of compatible models/years/trims that I got off of Subaru's website: Subaru Crosstrek 2.0L 5MT Premium 2016, 2017 Subaru Crosstrek 2.0L CVT Premium 2016, 2017 Subaru Crosstrek 2.0L HYBRID CVT Premium 2016 Subaru STI 2.5L TURBO 6MT Base 2015, 2016, 2017, 2018, 2019, 2020, 2021 Subaru STI 2.5L TURBO 6MT LIMITED 2015, 2016, 2017, 2018, 2019, 2020, 2021 Subaru STI 2.5L TURBO 6MT Premium 2018, 2019, 2020, 2021 Subaru STI 2.5L TURBO 6MT Sport SEDAN 2012, 2013, 2014 Subaru STI 2.5L TURBO 6MT TYPE RA 2018 Subaru STI 2.5L TURBO 6MT WAGON 2008, 2009, 2010, 2012, 2013, 2014 Subaru WRX 2.0L 6MT Base 2015, 2016, 2017, 2018, 2019, 2020, 2021 Subaru WRX 2.0L 6MT Limited 2015, 2016, 2017, 2018, 2019, 2020, 2021 Subaru WRX 2.0L 6MT Premium 2015, 2016, 2017, 2018, 2019, 2020, 2021 Subaru WRX 2.0L 6MT PREMIUM HK 2017 Subaru WRX 2.0L CVT Base 2015, 2016, 2019 Subaru WRX 2.0L CVT Limited 2015, 2016, 2017, 2018, 2019, 2020 Subaru WRX 2.0L CVT Limited w/EyeSight 2016, 2017 Subaru WRX 2.0L CVT LIMITED WITH LIP ES 2018, 2019, 2020, 2021 Subaru WRX 2.0L CVT Premium 2015, 2016, 2017, 2018 Subaru WRX 2.0L CVT PREMIUM WITH LIP ES 2019, 2020, 2021 Subaru WRX 2.5L TURBO 6MT S209 2019 Print Settings Printer: X1-Carbon Rafts: No Supports: No Resolution: 0.3mm Layer Height / 0.6mm Hardened Steel Nozzle Infill: 25% Support Cubic Filament: Polymaker ASA (Scaled to 100.80% to compensate for ASA shrinkage) Notes: Printing this model took less than 2hr @0.30mm layer height. I recommend printing in heat resistant filaments. I personally chose to use ASA due to it's temperature tolerances and UV resistance. I believe PETG would also be sufficient. I've included the.step file for this model which should hopefully make it easy to adjust any dimensions if needed. The unaltered dimensions of the model are as follows: Upper half: Outer Diameter: 100mm Inner Diameter: 95mm Height: ~80mm Lower half: Outer Diameter: 75mm Inner Diameter: 70mm Width of Flat Side: 65mm Height: ~60mm Model overall size: 100mm x 145mm.