5.5Deg For 6.5mbquart Speaker Adapter Subaru Legacy Gen1 Chopped Sides Ver2morechop Rev1MountHoleWidening - image

Files (1)

angled55degfor65mbquartspeakeradaptersubarulegacygen1choppedsidesver2morechoprev1mountholewideni.stl

STL

81.8 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 30%	100% solid	Recommendation
angled55degfor65mbquartspeakeradaptersubarulegacygen1choppedsidesver2morechoprev1mountholewideni.stl	Mount / bracket	81.8 KB STL	Slice file	Slice file	Slice file	Ensure proper adhesion with a brim or raft if necessary

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Door Panels

5.5Deg For 6.5mbquart Speaker Adapter Subaru Legacy Gen1 Chopped Sides Ver2morechop Rev1MountHoleWidening

0 downloads49 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Remixed a few other adapters to suit my needs, this fits the front doors of 1989-1994 Subaru Legacy Cars and should fit and clear window rolling down for any speaker with similar dimensions to the 6.5" MB Quart Discus series speakers which is: CUT-OUT -Ø5.72" CHASSIS DEPTH FROM FLANGE-2.61" https://youtu.be/0njlCokdPCI Printed on a Creality CR-10s with E3D V6 Volcano clone hotend, 0.8mm nozzle Print settings: 225 degrees C 0.6mm layer height no support 8 line brim for adhesion 30% infill 8 walls This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/6sFdUDCuUHS