6.5 Inch Speaker Spacer Ring for 1st Gen Honda Insight - image

Files (2)

GrillSpacer.stl

STL

1.2 MB

SpacerRing.stl

STL

145.9 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

2 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
GrillSpacer.stl	Printable file	1.2 MB STL	Slice file	Slice file	Slice file	Print with the larger diameter of SpacerRing.stl facing up and the face of GrillSpacer.stl facing down.
SpacerRing.stl	Printable file	145.9 KB STL	Slice file	Slice file	Slice file	Print with the larger diameter of SpacerRing.stl facing up and the face of GrillSpacer.stl facing down.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Door Panels

6.5 Inch Speaker Spacer Ring for 1st Gen Honda Insight

0 downloads33 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Exactly what it says in the title. Designed to be mounted with 2 self tappers and then M3 bolts to mount the speaker. Flip upside down before printing. "SpacerRing.stl" should have the larger diameter up, "GrillSpacer.stl" should have the face down. I'm not clever enough to adjust the orientation of the STL beforehand. Sorry. The ring for the grille is a very snug fit both in the door and with the grille, but should fit. Probably print in something higher temp than PLA. I'll likely have a lot of regrets here once the summer hits.