Files (1)

75mm_Mercedes_Wheel_Cap.stl

STL

222.9 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
75mm_Mercedes_Wheel_Cap.stl	Cover / cap	222.9 KB STL	Slice file	Slice file	Slice file	Use PETG / ASA; check sealing faces and verify in slicer.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

75mm Mercedes-Benz Wheel Cap

0 downloads62 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

This is a update of (ntinosmpir's mercedes rim cap 57mm) a 57mm Mercedes Hub Cap, I edited it so that this would fit a 75mm Mercedes-Benz rim. It is worth noting this was used and fit perfectly on a 1991 Mercedes-Benz 300E's original factory rims. Below are vehicles this should fit: C class ML class CLS class S class GL class SL class E class CLK class CL class GL class.