Files (1)
Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| RadioKnob_SmallMod.stl | Primary model | 78.0 KB STL | Slice file | Slice file | Slice file | Ensure proper orientation for minimal supports |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
92-96 Toyota Camry Radio Knob (Bass/Treb, Fade/Bal Knob)
Shared by
3DPrintedCarPartDescription
This is a remix project that will fit the 1992-1996 Toyota Camry factory radio. These knobs are for the bass/treble and bal/fade knobs, or the smaller knobs. Usually these kinds of knobs are prone to breaking and often go missing. It is a relatively quick print. The only modification I did to this was add knurled heads to the knobs to extend from the faceplate. The original project that this was based off of works, but you can't adjust levels when the switch is in the inward position. That is why I extended it. I have printed these using PLA and they seem to work fine. You will need to print two of these.
Compatible Cars
Originally published on thingiverse.com by Owen Graham (OwenGMan) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
