CupHolderV1_220.3mf

3MF

1.8 MB

CupHolderV1_220.stl

STL

5.4 MB

Print guidance estimate

Estimated from part metadata

Print cost & setup estimate

Planning numbers for filament, cost, time, and setup. Treat them as estimates until you confirm the file in your slicer.

2 model files

Typical selected file

64g

Based on 25% main infill for the largest likely-needed model file

Material cost

$1.53

Filament only at roughly $24/kg PETG / ASA

Print time

1.8h–3.0h

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
CupHolderV1_220.3mf	Mount / bracket	1.8 MB 3MF	36g $0.86	39g $0.93	85g $2.04	Disable skirt, brim, and raft as suggested in the description for a clean print
CupHolderV1_220.stl	Mount / bracket	5.4 MB STL	59g $1.41	64g $1.53	140g $3.36	Disable skirt, brim, and raft as suggested in the description for a clean print

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

'97 Honda Civic DX Cup Holder (Shaved for 220mm bed)

0 downloads58 views0 likes

Shared by

Verified

Description

Shaved version to print on 220x220mm bed for example on Ender 3 Pro Disable skirt / brim / raft.

Published Jun 30, 2026Updated Jul 15, 2026

Originally published on thingiverse.com by Krystian Dopierała (Szakallov) · License: CC BY

Verified by drivers

Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.

Loading fitment proof…

Comments (0)

Part lists

Save this part to named public or private collections. Public lists can be shown on this part page.

Finding specific fitment/category matches first.