99-02 GMT800 Center Console Radio Delete - image

Files (1)

99-02_Center_Console_Radio_Delete.stl

STL

369.1 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
99-02_Center_Console_Radio_Delete.stl	Primary model	369.1 KB STL	Slice file	Slice file	Slice file	Ensure a brim or raft is used for better adhesion to the print bed

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Center Console

99-02 GMT800 Center Console Radio Delete

0 downloads35 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Saw a similar concept for 2003-2006 GMT800 trucks and designed this for the 1999-2002 center consoles. Installed in an '02 Suburban. The panel will snap into place with a little persuasion and will stay in place without glue or adhesives of any type. Inside rounded corners of the console will need to be squared off for proper fitment.