A-Pillar gauge pod for ND Mazda MX-5 Miata - image

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

0 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Interior

A-Pillar gauge pod for ND Mazda MX-5 Miata

0 downloads39 views0 likes

Download at source

Shared by

3DPrintedCarPart

Verified

Description

This is a gauge pod I designed for my car. There are some aftermarket gauge pods for the ND, but I didn't like the idea of mounting it on the air vent (and having exposed wires) so I designed one to fit the a-pillar. Should contour the a-pillar of an ND perfectly, as well as a few other Mazda vehicles as far as I've heard. Did the best I could to get the gauge angled just right while being as out of the way of the steering wheel as possible.

Compatible Cars

Mazda MX-5

Updated Jul 15, 2026

Originally published on thingiverse.com by Erik Johnson (SleepIsForTheWeek) · License: CC BY-NC

Verified by drivers

Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.

Loading fitment proof…

Comments (0)

Part lists

BMW

3.0K

License: CC BY

View & download STL files