A-pillar trim Clip for BMW E36 vehicles - image

Files (1)

bmw_e36_a-pillar_clip.STL

STL

48.3 KB

Print guidance estimate

Uses saved filament metadata

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

50g

Based on 25% main infill across listed model files

Material cost

$1.20

Filament only at roughly $24/kg PETG / ASA

Print time

2.0h saved / 1.4h–2.4h estimate

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
bmw_e36_a-pillar_clip.STL	Clip	48.3 KB STL	46g $1.10	50g $1.20	110g $2.63	Ensure proper adhesion to the print bed to avoid warping

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Interior

A-pillar trim Clip for BMW E36 vehicles

1 downloads479 views0 likes

Shared by

Michael Chen

Verified

Description

The BMW e36 A-pillar clips are known to break off, so I made some that will fix it. They are to be epoxied on and might need heat to shape the bottom to contour to the a-pillar trim. ABS is recommended, but I only had PLA. But still works great. The actual car is a 1995 318ti, but should fit other e36's as well. I will be slowly fixing up my brittle interior one piece at a time!

Print Settings

Time: 2h

Filament: 50g

Supports: Not needed

Compatible Cars

1995 BMW E36

Published Mar 12, 2026Updated Jul 15, 2026

Originally published on thingiverse.com · License: CC BY

Verified by drivers

Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.

Loading fitment proof…

Comments (0)

Part lists

BMW

3.1K

License: CC BY

View & download STL files