Files (2)

seat_adjuster_for_output.obj

OBJ

961.4 KB

seat_adjuster_for_output.step

STEP

189.4 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

2 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
seat_adjuster_for_output.obj	Printable file	961.4 KB OBJ	Slice file	Slice file	Slice file	Ensure proper orientation in the slicer for optimal print quality and minimal supports
seat_adjuster_for_output.step	Printable file	189.4 KB STEP	Slice file	Slice file	Slice file	Ensure proper orientation in the slicer for optimal print quality and minimal supports

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Knobs/Buttons

Abarth Seat Adjuster Handle

1 downloads45 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Seat adjuster handle comparable with Abarth and Fiat 500 seat. I have designed a more simple, minimal handle that could simply be swaped from the original handle to the new one. Seat hight adjustment works completely fine. Requires three M5 bolt from the original handle.