Abs cable bracket renault laguna 2 - image

Files (1)

abs_kabel_holder_renault_laguna_2_forhjul_v1_sketch_v2.stl

STL

404.8 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
abs_kabel_holder_renault_laguna_2_forhjul_v1_sketch_v2.stl	Mount / bracket	404.8 KB STL	Slice file	Slice file	Slice file	Ensure the model is oriented to minimize supports, if needed.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Mechanical/Functional

Abs cable bracket renault laguna 2

0 downloads61 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

I needed this holder for my laguna 2 it is made with PLA, i have made a m4 0,7mm thread into the hole, but it is difficult to print such small thread. I then screwed in a m4 screw with a washer.