Additions for Speedo Holder for Mini Cooper vehicles! - image

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

0 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Phone Mounts

Additions for Speedo Holder for Mini Cooper vehicles!

0 downloads38 views0 likes

Download at source

Shared by

3DPrintedCarPart

Verified

Description

These are the additions to the main thing, The ULTIMATE MINI Cooper Phone Mount: (https://www.thingiverse.com/thing:2236035) Most of these are phone holders that are mounted with four M3 bolts to the arms of the central holder. The phone is supposed to be inserted from the top, and there is a gap for the charging cable on the bottom. Additionally, here you can find the ANTLERS that stick out on the top of the speedometer, showing that you have a really evil MINI:) The original part is presented in.STEP format which can be imported into most 3D design software and modified to your needs. The main things you want to adapt to are the thickness of the bottom part of the phone and its width. All other parts were made in 123D Design, and if you want to modify those slightly, please use 123D, as it is an amazing piece of software.