Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| No printable model files are available for an estimate yet. | ||||||
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Airlift Control Unit Holder for Audi A3/S3/RS3 8V
Shared by
3DPrintedCarPartDescription
I designed a holder for the airlift control for my S3 8V. Unfortunately, there is no sensible solution where the control unit could be better positioned so that you can still monitor the pressure continuously. I used the following magnets: https://www.amazon.de/dp/B007JTL7G6/ref=cm_sw_em_r_mt_dp_GquWFb93HBBV2?_encoding=UTF8&psc=1 the magnets should be glued well, as they are very powerful considering their size I also have a file where you can't simply remove the control unit because it is screwed directly.
Compatible Cars
Originally published on thingiverse.com by Markus Herzing (markus1994) · License: CC BY-NC
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
