11-5mm.stl

STL

38.4 KB

9-25m.stl

STL

38.4 KB

916_Washer_Rail_Clip.stl

STL

41.9 KB

Print guidance estimate

Estimated from part metadata

Print cost & setup estimate

Planning numbers for filament, cost, time, and setup. Treat them as estimates until you confirm the file in your slicer.

3 model files

Typical selected file

11g

Based on 25% main infill for the largest likely-needed model file

Material cost

$0.25

Filament only at roughly $24/kg PETG / ASA

Print time

18m–30m

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
11-5mm.stl	Printable file	38.4 KB STL	10g $0.23	10g $0.25	23g $0.54	Ensure proper orientation for minimal supports
9-25m.stl	Printable file	38.4 KB STL	10g $0.23	10g $0.25	23g $0.54	Ensure proper orientation for minimal supports
916_Washer_Rail_Clip.stl	Clip	41.9 KB STL	10g $0.23	11g $0.25	23g $0.55	Ensure proper orientation for minimal supports

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Alfa Romeo 916 Washer Rail Cliip

0 downloads29 views0 likes

Shared by

Verified

Description

Clip for holding the window washer rail in place. 3 Versions for different wipers.

Published Jun 27, 2026Updated Jul 15, 2026

Originally published on thingiverse.com by Bjørn gustav Baklid (bgbak) · License: CC BY

Verified by drivers

Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.

Loading fitment proof…

Comments (0)

Part lists

Save this part to named public or private collections. Public lists can be shown on this part page.

Finding specific fitment/category matches first.