Files (1)

skoda_wheel_cap.stl

STL

813.5 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
skoda_wheel_cap.stl	Cover / cap	813.5 KB STL	Slice file	Slice file	Slice file	Use PETG / ASA; check sealing faces and verify in slicer.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Emblems/Badges

Alloy Wheel Cap for Skoda

0 downloads34 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Wheel cap for alloy rim for Skoda cars with 57mm center hole diameter. (For example Octavia II, III, Superb II, III, Fabia II, III, Rapid, Yeti etc.) Printed from PLA, supports needed. 0.2mm resolution. Best visual result with two colours of filament.