Ashtray Replacement for Mini Cooper vehicles - image

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

0 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Interior

Ashtray Replacement for Mini Cooper vehicles

0 downloads29 views0 likes

Download at source

Shared by

3DPrintedCarPart

Verified

Description

This is a spin off from the iPhone Holder for the Classic Mini Cooper. http://www.thingiverse.com/thing:2203204 This will replace the Ashtray in your Classic Mini. With an empty Box for some storage place;-) --Box-- Use six M2.5 x 15mm screws to attach the front to the main Box. Here you will need to cut the thread into the Box. -- Mount to Mini -- Once assembled push the Box in your Mini. Done!