Audi A3 8V Ram Mount adapter for cupholder - image

Files (1)

ram_mount.stl

STL

897.7 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 90%	100% solid	Recommendation
ram_mount.stl	Mount / bracket	897.7 KB STL	Slice file	Slice file	Slice file	Ensure a tight fit in the compartment to prevent rattles

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Cup Holders

Audi A3 8V Ram Mount adapter for cupholder

0 downloads40 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

This is an adapter to fit in the place of the phone in Audi A3, S3 and RS3 models.. I used two processes to print the top portion with 100% infill as well as about 2mm of the body at the top as those are the points where all the stress is being applied. The adapter fits tightly in the compartment so there should not be any rattles as the space is coated with TPU.

Compatible Cars

Audi A3

Published Jun 26, 2026Updated Jul 15, 2026

Originally published on thingiverse.com by dimitri stephan (drummerdimitri) · License: CC BY

Verified by drivers

Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.

Loading fitment proof…

Comments (0)

Part lists

Save this part to named public or private collections. Public lists can be shown on this part page.

Related Parts

Finding specific fitment/category matches first.