Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| No printable model files are available for an estimate yet. | ||||||
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Audi A3/A4/A5/S3/S4/S5 Paddle Shifter
Shared by
3DPrintedCarPartDescription
Was unable to find paddle shifter extensions for B9 Audi A/S 3/4/5 (it may fit more models, i just cant verify that). It fits wonderfully, my Siraya Tech resin shrunk a touch as i didnt use the Lychee compensation so i had to slightly file the clips back a touch. So its a quick print job, so if you had to re-print at 101% you could do that depending on your printer calibration. But these have tight fitment, they stick on the existing paddle shifters and lock into place without any double sided tape etc. Mine have been attached for a couple of weeks now and are still as snug as when i first put them on. I was able to print these directly on the build plate without supports/rafts etc, i just slowed my lift speed a bit due to the surface area. Enjoy! please share your results!
Originally published on thingiverse.com by Justin Gutzman (jgutz20) · License: CC BY-NC-ND
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
