Files (1)

02-23_Audi_A4_B6_Navigation_Knob.stl

STL

417.7 KB

Print guidance estimate

Uses saved filament metadata

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

50g

Based on 25% main infill across listed model files

Material cost

$1.20

Filament only at roughly $24/kg PETG / ASA

Print time

2.0h saved / 1.4h–2.4h estimate

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
02-23_Audi_A4_B6_Navigation_Knob.stl	Primary model	417.7 KB STL	46g $1.10	50g $1.20	110g $2.63	Print with the logo pointing up for best results

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Interior

Audi A4 B6 Navigation Knob

0 downloads242 views0 likes

Shared by

Michael Chen

Verified

Description

Our Audi A4 B6 from 2001 lacked the navigation knob located at the center console. So i came up with this one :) The diameter of the pin on the car is 5,53mm. I had quite a hard time, getting the print to the right dimension and in the end i used a 6mm drill to partially enlarge the hole. Now the knob has a nice tight fit without the need of any glue. For best results print the knob with the logo pointing up. For good results, create supports, so the hole will be printed right.