Files (2)

Final_phone_holder.stl

STL

6.1 MB

Final_Phone_holder_base.stl

STL

1.1 MB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

2 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Final_phone_holder.stl	Mount / bracket	6.1 MB STL	Slice file	Slice file	Slice file	Ensure the model is oriented to minimize supports
Final_Phone_holder_base.stl	Mount / bracket	1.1 MB STL	Slice file	Slice file	Slice file	Ensure the model is oriented to minimize supports

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Phone Mounts

Audi A4/S4 B6 iPhone 6 holder

0 downloads32 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

This is an iPhone 6 holder that fits in the pocket behind the cigar lighter (12v accessory) in an Audi A4 B6, it may also fit in a B7 also but can't be sure. It is modelled on the phone being in a Spigen Neo Hybrid case and has a lightning port in the bottom so it can be connected to your car stereo or charged. A hole has to be cut right through the pocket with a 1-2mm lip remaining so the holder can rest on it.