Audi A4/S4/RS4 TPMS Module holder - image

Files (1)

TPMS_holder.stl

STL

345.4 KB

Print guidance estimate

Estimated from part metadata

Print cost & setup estimate

Planning numbers for filament, cost, time, and setup. Treat them as estimates until you confirm the file in your slicer.

1 model file

Recommended kit

50g

Based on 25% main infill across listed model files

Material cost

$1.20

Filament only at roughly $24/kg PETG / ASA

Print time

2.0h saved / 1.4h–2.4h estimate

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
TPMS_holder.stl	Mount / bracket	345.4 KB STL	46g $1.10	50g $1.20	110g $2.63	Ensure proper orientation for minimal supports

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Accessories

Audi A4/S4/RS4 TPMS Module holder

2 downloads275 views0 likes

Shared by

Michael Chen

Verified

Description

This is a support bracket for the Audi TPMS module, 8S0 907 273. Suitable for Audi A4/S4/RS4 B9 models, and may well fit A5/S5/RS5 as well. This holds the module securly by the rear right wheel. The OEM fitting location is under the car, but this works just as well, and is neater and easier, whilst protecting the module and wiring. Additional = 2 small self tapping screws to hold module onto the bracket.

Print Settings

Time: 2h

Filament: 50g

Supports: Not needed

Compatible Cars

Audi A4

Published Feb 13, 2026Updated Jul 15, 2026

Originally published on thingiverse.com · License: CC BY

Verified by drivers

Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.

Loading fitment proof…

Comments (0)

Part lists

Save this part to named public or private collections. Public lists can be shown on this part page.

Related Parts

Finding specific fitment/category matches first.