Audi A5 10,25" Carplay Screen Bracket - image

Files (1)

audi-a5-display-bracket.stl

STL

54.0 KB

Print guidance estimate

Uses saved filament metadata

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

50g

Based on 25% main infill across listed model files

Material cost

$1.20

Filament only at roughly $24/kg PETG / ASA

Print time

2.0h saved / 1.4h–2.4h estimate

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
audi-a5-display-bracket.stl	Mount / bracket	54.0 KB STL	46g $1.10	50g $1.20	110g $2.63	Ensure a stable printing surface to prevent warping

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Accessories

Audi A5 10,25" Carplay Screen Bracket

0 downloads192 views0 likes

Shared by

Michael Chen

Verified

Description

As I was upgrading my original screen to the 10,25" Android Screen with Carplay, I recognized that you couldn't use the the originial pins for the plastic cover, as you needed to break the silver cover from the black backpart, that has all the pins attached. I figured it would be better if you could just put on the whole original cover again, but that didn't work, as the mounting bracket for the new screen would block it. So i redesigned the bracket to fit the original cover and moved the screw points out a little bit.

Print Settings

Time: 2h

Filament: 50g

Supports: Not needed

Compatible Cars

Audi A5

Published Feb 13, 2026Updated Jul 15, 2026

Originally published on thingiverse.com · License: CC BY

Verified by drivers

Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.

Loading fitment proof…

Comments (0)

Part lists

BMW

3.0K

License: CC BY

View & download STL files