Files (1)

armrest_inlay.stl

STL

7.3 KB

Print guidance estimate

Uses saved filament metadata

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

50g

Based on 25% main infill across listed model files

Material cost

$1.20

Filament only at roughly $24/kg PETG / ASA

Print time

2.0h saved / 1.4h–2.4h estimate

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
armrest_inlay.stl	Primary model	7.3 KB STL	46g $1.10	50g $1.20	110g $2.63	Small functional file: print slowly; consider 80–100% infill for durability.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Interior

Audi A5 (B8) armrest inlay

0 downloads176 views0 likes

Shared by

Michael Chen

Verified

Description

I made this very simple model to use it as an inlay for the front-center armrest of my new Audi A5 Sportback (B8). If gives you a flat area to put larger smartphones on it, which do not fit in otherwise. Additionally you can hide your charging cables or any audio cables underneath it. My build fits perfectly in the space in the car. After glueing 1 mm thick felt on top and to the sides, it sits very tight and its hard to recognize that its a self-built thing. To remove it or access the space underneath, I pull the cable which is fittet through the aperture (see pictures).

Print Settings

Time: 2h

Filament: 50g

Supports: Not needed

Compatible Cars

Audi A5

Published Feb 13, 2026Updated Jul 15, 2026

Originally published on thingiverse.com · License: CC BY

Verified by drivers

Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.

Loading fitment proof…

Comments (0)

Part lists

BMW

3.1K

License: CC BY

View & download STL files