Files (1)
Based on 100% main infill across listed model files
Filament only at roughly $24/kg PETG / ASA
Uses 70 mm/s, 0.2 mm layers; verify supports in slicer
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 100% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| Adattatore_CrickIdraulico_AUDI_A6_V2.3.stl | Primary model | 1.9 MB STL | 21g $0.50 | 50g $1.20 | 50g $1.20 | Ensure the adapter is printed with a stable and planar base to match the crick |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
AUDI A6 4F (C6) Avant MY2010 - Hydraulic Crick Adapter
Shared by
Michael ChenDescription
This my design is suitable for a cheap hydraulic crick (2Tons model) and it is an adapter to be inserted between the crick and the car. Keep in mind that this adapter cen be printed both in PLA or PETG or ABS, but must be printed at 100% fill. It must be fullfilled. I'm using it on my Car AUDI A6 4F(C6) Avant MY2010 from about 2 years and now I've decided to share the design here. Before raising the car verify that the adapter is stable on the crick and it must be perfectly planar respect the base of the crick. If some modifications are necessary, please write to me in the comments. I'm not responsible for any kind of damage to persons, animals or things. Keep in mind that the car is heavy and even if in compression this kind of design has been tested the safaty must be even at the first place.
Print Settings
Compatible Cars
Originally published on thingiverse.com · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
