Audi B6 / B7 A4 vent clip mount (Proclip style) - image

Files (1)

B7_A4_vent_clip.STL

STL

260.7 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
B7_A4_vent_clip.STL	Clip	260.7 KB STL	Slice file	Slice file	Slice file	Ensure a solid adhesion to the print bed to avoid warping

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Vents

Audi B6 / B7 A4 vent clip mount (Proclip style)

0 downloads40 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

A base clip for the center vent and dash trim for an Audi b6 / b7 in the style of a Proclip mount. I mounted it to the very center to have the least bending on the vent frame (plus the center section is much stiffer and holds better) and made a phone mount to screw into it for my Galaxy S9 with a case and a wireless charger base, but you can attach anything to it. Sits very solid and hasn't fallen with any sort of spirited driving yet. Printed in PETG, don't print in PLA due to interior car temps.