Files (2)

Audi_adapter_iPhone_11.stl

STL

52.6 KB

Audi_adapter_iPhone_SE2020.stl

STL

43.2 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

2 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Audi_adapter_iPhone_11.stl	Printable file	52.6 KB STL	Slice file	Slice file	Slice file	Ensure a stable printing surface to avoid warping
Audi_adapter_iPhone_SE2020.stl	Printable file	43.2 KB STL	Slice file	Slice file	Slice file	Ensure a stable printing surface to avoid warping

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Phone Mounts

Audi phone adapter

0 downloads35 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

The original of dvd71 was very cool but it didn't fit in my printer. So I took dvd71's STL and cut it up in tinkercad for its baseplate with holes and added the bare minumum to hold our iPhones. Two versions: One for SE2020 without case and one for Iphone 11 with case.