Files (2)

Couvercle.stl

STL

889.9 KB

Support_bas.stl

STL

286.8 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

2 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 10%	100% solid	Recommendation
Couvercle.stl	Printable file	889.9 KB STL	Slice file	Slice file	Slice file	Ensure proper adhesion to the print bed to avoid warping.
Support_bas.stl	Printable file	286.8 KB STL	Slice file	Slice file	Slice file	Ensure proper adhesion to the print bed to avoid warping.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Phone Mounts

Audi phone cup mount

0 downloads32 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Hello, My first published thing here. This is a Mobile phone cup mount (Iphone X sized) for Audi A4 2017, but should be OK for other models. Very stable mobile mount and if it is printed in black it is (nearly) similar to the black finish of the inside car. 2 parts to print with 20% fill. Stick the both parts together and that's it... Enjoy and tell me if it is also matching with other models.