Files (3)

Audi_Halter_Teil_1.stl

STL

161.4 KB

Audi_Logo.stl

STL

159.3 KB

Logoeinsatze.stl

STL

79.7 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

3 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Audi_Halter_Teil_1.stl	Printable file	161.4 KB STL	Slice file	Slice file	Slice file	Scale the rings to 98% and the inserts to 95% as instructed for an easy fit.
Audi_Logo.stl	Printable file	159.3 KB STL	Slice file	Slice file	Slice file	Scale the rings to 98% and the inserts to 95% as instructed for an easy fit.
Logoeinsatze.stl	Printable file	79.7 KB STL	Slice file	Slice file	Slice file	Scale the rings to 98% and the inserts to 95% as instructed for an easy fit.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Phone Mounts

Audi Phone Dock iPhone

0 downloads27 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Simple Phone Dock for Cup Holder. Made the rings out of transparent Material and put some LED lights into it. Scale the Rings to 98% and the inserts to 95%, to provide an easy fit.